NKE 52308 thrust ball bearings

B:7.00 mm; D:28.0000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:2040 N; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Sealed Speed Rating n3:16000 rpm; d:15.000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:4030 N;

G:74.498 mm; B4:16.916 mm; B1:58.064 mm; Threads per inch:12; d3 max.:98.552 mm; d1:63.5 mm; Sleeve:S 15x2.1/2; d:75 mm; B:15.342 mm; Mass adapter sleeve assembly:1 kg;

B:30.20 mm; Oil Speed Rating n2:6300 rpm; d:50.000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:39000 N; Basic Dynamic Radial Load Rating C:48800 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:4800 rpm; Sealed Speed Rating n3:4800 rpm; D:90.0000 mm;

Reference speed:22000 r/min; Basic dynamic load rating C:8.8 kN; Mass needle roller and cage assembly:0.008 kg; Fatigue load limit Pu:1.5 kN; Basic static load rating C0:12.9 kN; U:13 mm; Fw:18 mm; Ew:22 mm; Limiting speed:24000 r/min;

B:7.00 mm; D:28.0000 mm; Accessories:One Seal; Basic Static Radial Load Rating Co:2040 N; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Sealed Speed Rating n3:16000 rpm; d:15.000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:4030 N;

Oil Speed Rating n2:3500 rpm; B:33.00 mm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:134000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; d:130.000 mm; Grease Speed Rating n1:0 rpm; Basic Dynamic Radial Load Rating C:121000 N;

d:85.000 mm; Grease Speed Rating n1:2500 rpm; D:210.0000 mm; B:52.00 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:190000 N; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:166000 N; Fillet Radius rb:1.00 mm;

Basic Static Radial Load Rating Co:204000 N; Grease Speed Rating n1:3800 rpm; Fillet Radius rb:1.00 mm; B:70.00 mm; Fillet Radius ra:2.00 mm; D:150.0000 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:190000 N; Oil Speed Rating n2:4500 rpm;

Taconite seal:TER 159; P60°:557 kN; Mass pillow block:261 kg; S:4.763 mm; H:419.1 mm; Da:359.999 mm; H2:85.725 mm; A2:358.775 mm; L:749.3 mm; PG:1/4 NPT;

Oil:8 400 min-1; Static (Cor):24.100 kN; B:21 mm; Grease:7 100 min-1; a:35 mm; d:35 mm; Pu:1.095 kN; D:80 mm; rs (min):1.5 mm; Dynamic (Cr):40.388 kN;