FAG 33018-N11CA tapered roller bearings

Load Direction:Radial / Thrust; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Raceway Ring Shape:Tapered Roller; B:16.25; Specifications/Environment:Standard; Raceway Ring Shape:Tapered Roller; Revolution Frequency(rpm):7300; d:25; Outer Ring Type:Flat;

Height Indication:Height Selection; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Height H(mm):25 ～ 40; Days to Ship:8 Days; Shape:L-Shaped; RoHS:6; Number of Bearings:Single; Bearing Material:[Steel] Steel; Number of Bearings:Single;

G:M6x1; s1:36.55 mm; d:34.92 mm; T min.:-20 °C; A2:44.3 mm; B:38.1 mm; A:36 mm; H3:100; d1:55 mm; A4:27 mm;

Bearing Material:[Steel] Steel; Flange O.D. H(φ):66; RoHS:6; Days to Ship:7 Days; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6003; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; Width T(mm):16;

G:M6x1; s1:36.55 mm; d:34.92 mm; T min.:-20 °C; A2:44.3 mm; B:38.1 mm; A:36 mm; H3:100; d1:55 mm; A4:27 mm;

G:M6x1; s1:36.55 mm; d:34.92 mm; T min.:-20 °C; A2:44.3 mm; B:38.1 mm; A:36 mm; H3:100; d1:55 mm; A4:27 mm;

A:32 mm; H:33.3 mm; Designation of closed end cover:SCCE204; L1:40 mm; H2:64 mm; Designation of bearing:ES204G2T20; A1:19 mm; N1:19 mm; B:21.4 mm; T min.:-20 °C;

Bearing Unit, Type:Round flange shape; Rolling Element Material:Bearing Steel; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):35100; Seal:Nitrile; Unit Body Material:Cast Iron; Fit:J7; Rolling Element Material:Bearing Steel; RoHS:6;

H2:84 mm; Recommended tightening torque for set screw:3.7 Nm; S:15.9 mm; s1:19.05 mm; C0:11.2 kN; N:M14; H:42.9 mm; E:18 mm; T max.:100 °C; Weight:1.04 kg;

G:M6x1; s1:36.55 mm; d:34.92 mm; T min.:-20 °C; A2:44.3 mm; B:38.1 mm; A:36 mm; H3:100; d1:55 mm; A4:27 mm;

d:15.88 mm; H1:14 mm; C0:6.65 kN; B:34 mm; Designation of housing:PG204-; G:M6x1; E:16 mm; T max.:100 °C; C:12.8 kN; B1:43.5 mm;