NKE Bearings
NKE Bearings offer both standard and special bearings for all industrial applications as well as technical services, including product development, application engineering, consulting, documentation and training.
NKE’s core functions – such as engineering, product development, final processing of components, modular assembly, quality assurance, logistics, sales and marketing – are centralised at our headquarters in Steyr, Austria. The site is certified to ISO9001:2008, ISO14001:2004 and OHSAS 18001. In April 2006, NKE was awarded the Austria Quality Seal in recognition of its high quality standards.Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft. Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly. Spherical bearings and spherical rod ends are used on articulating joints and when the bearing must accommodate for axial misalignment.
- NKE 6022-2Z-NR deep groove ball bearings
- 8 400 min-1
- 24.100 kN
- NKE 24196-MB-W33 spherical roller bearings
- 74.498 mm
- 16.916 mm
- NKE 16032 deep groove ball bearings
- 85.000 mm
- 2500 rpm
- NKE NNCL4944-V cylindrical roller bearings
- 30.20 mm
- 6300 rpm
- NKE NUP2316-E-MPA cylindrical roller bearings
- 85.000 mm
- 2500 rpm
- NKE 1215-K+H215 self aligning ball bearings
- TER 159
- 557 kN
- NKE 52308 thrust ball bearings
- 3500 rpm
- 33.00 mm
- NKE 6005-2Z deep groove ball bearings
- 8 400 min-1
- 24.100 kN
- NKE 2319-K self aligning ball bearings
- 8 400 min-1
- 24.100 kN
- NKE PCJTY30-N bearing units
- 30.20 mm
- 6300 rpm
- NKE NU1009-E-MPA cylindrical roller bearings
- 22000 r/min
- 8.8 kN
- NKE NUP224-E-MA6 cylindrical roller bearings
- 3500 rpm
- 33.00 mm